This post is also available in:
日本語 (Japanese)
Laser focusing holder
■The laser focusing holder is used to introduce the laser light to the fiber element.
■Centering adjustment of YZ axis orthogonal to optical axis is possible for fiber element holding part.
In addition, it is possible to fine-tune the angle of inclination of the βθ axis as the fulcrum reference by the kinematic mechanism.
■The objective lens holding part can adjust focus fine movement in the optical axis direction (X axis).
The inclination angle β2 of the whole holder unit can also be finely adjusted.
■FC receptacle and objective lens (× 10) are standard equipment.
■It supports magnification change and combination change of the objective lens. "Please contact us"
| Part number | Adjustment axis · adjustment range | Price |
| ＬＦ－１０１ | X：±5mm / Y&Z：±1.5mm / β&θ&β2：±2° | ￥１０８，０００ |
Spatial filter holder
■The spatial filter holder is a holder that makes it possible to eliminate wavefront noise and distortion of the laser light by precision pinhole and to create a clear wavefront.
■For precision pinhole, centering adjustment of YZ axis orthogonal to the optical axis is possible.
In addition, it is possible to fine-tune the angle of inclination of the βθ axis as the fulcrum reference by the kinematic mechanism.
■The objective lens holding part can adjust focus fine movement in the optical axis direction (X axis).
■You can choose from installation type and pole attachment type.
Also, with the pole-attached type, the inclination angle β2 of the whole holder unit can also be finely adjusted.
■Precision pinhole (φ 25 μm) and objective lens (× 10) are standard equipment.
■It also supports lens magnification and combination change.
"Please contact us"
Round laser holder
■The round laser holder is used to fix the cylindrical laser.
■It is possible to fine tune the βθ axis by the fulcrum reference by the kinematic mechanism.
■Please specify the diameter φ of the laser when ordering.
Round type laser holder with upper operation type
■The upper operation type round laser holder is used to fix the cylindrical laser.
■It is possible to fine tune the βθ axis by the fulcrum reference by the kinematic mechanism.
■The upper operation type is excellent in operability with upper access.
■Please specify the diameter φ of the laser when ordering.
Cylindrical laser holder
■The cylindrical laser holder is used to fix the cylindrical laser.
■Adjust the attitude in the YZ axis direction by adjusting when installing the laser body.
■There is also a type that allows fine adjustment of the inclination angle β 2 of the whole holder unit after laser fixation.
Slide type laser holder
■Slide type laser holder is used to fix cylindrical laser.
■To fix the laser, remove the left and right clamps of the upper slide mechanism, and adjust them vertically.After installation, fix with the laser clamp at the center of the upper slide.
■The V-groove structure of the base part realizes stable fixing, and it is easy to adjust front and rear after installation.
| Part number | Adaptive laser diameter | Price |
| ＬＨＶ－５０１ | Ｍａｘ φ５０ｍｍ | ￥２５，０００ |
Stand type laser holder
■For the stand type laser holder, it is possible to adjust the vertical coarse movement of the laser holder part. You can operate the optical axis height in the wide range.
■Fix the laser with the clamp on the top of the folder.
■The LHS-502 can fine tune the βθ axis by the fulcrum reference by the kinematic mechanism.
Beam pocket · damper
■Beam pocket (damper) is used to block laser light.
■Inside, by performing taper processing and light shielding screw processing, we adopt a structure that shields and diffuses laser light.
■The standard product is equipped with φ12 mm · L = 60 mm pole.
The range of catalog publication (L = 20 ~ 120 mm) also supports pole length change.
| Part number | Incident diameter【ｍｍ】 | Price |
| ＬＰ－１ | φ１０ | ￥２２，０００ |
